Get-Appxpackage adalah perintah PowerShell yang dapat menampilkan daftar paket aplikasi yang diinstal di profil pengguna. Ini mencakup semua aplikasi yang diinstal dari Microsoft Store atau aplikasi pihak ketiga. Saat menggunakan perintah, jika Anda menerima kesalahan— Powershell Get-Appxpackage Access Denied, Not Recognized or Not Working , maka posting ini akan membantu Anda menyelesaikannya.

Pesan kesalahan yang Anda lihat mungkin berbeda, tetapi biasanya akan berbunyi:

Get-AppxPackage : The service cannot be started, either because it is disabled or because it has no enabled devices
associated with it. The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

PowerShell Get-Appxpackage Tidak berfungsi

Ini adalah masalah izin yang dapat diselesaikan dengan mengikuti beberapa pemeriksaan.

1. Jalankan PowerShell^{(Run PowerShell)} Dengan Izin Admin^{(Admin Permission)}
2. Periksa Izin^{(Check Permission)} Dengan Direktori Tujuan^{(Destination Directory)}
3. Periksa^{(Check AppX Deployment Service)} status Layanan Penerapan AppX.

Saat mengubah izin folder, pastikan Anda tidak menghapus akun pengguna yang sudah tersedia.

1] Jalankan PowerShell^{(Run PowerShell)} Dengan Izin Admin^{(Admin Permission)}

Karena perintah perlu diinstal pada aplikasi pada tingkat sistem, penting bagi Anda untuk menjalankan atau menjalankan perintah saat diluncurkan dengan izin admin.

• Tekan^(Press) tombol Mulai^(Start) , dan ketik PowerShell
• Ketika muncul di daftar, klik kanan dan pilih Run as Administrator
• Jalankan perintah dan itu akan berfungsi tanpa kesalahan.

Selain izin ditolak, Anda mungkin juga menerima Not Recognized atau Not Working sebagai kesalahan. Sementara Tidak Diakui terkait dengan izin admin, Tidak berfungsi terkait dengan Layanan^(Services) .

Buka Services Snap-in , dan temukan Client License Service ( ClipSVC ) dan AppX Deployment Service ( AppXSVC ). Pastikan mereka tersedia dan berjalan.

2] Periksa Izin^{(Check Permission)} Dengan Direktori Tujuan^{(Destination Directory)}

Jika Anda menginstal aplikasi di folder tertentu, maka pastikan Anda memiliki izin lengkap untuk menulis file di dalamnya.

• Pergi ke folder Tujuan^{(Destination)} , klik kanan dan pilih Properties
• Kemudian beralih ke tab Keamanan
• Periksa apakah akun Anda tersedia, dan memiliki izin penuh.
• Anda juga perlu memeriksa apakah akun pengguna Sistem tersedia dan memiliki kontrol penuh^(System)
• Jika tidak, Anda dapat mengklik tombol Edit , dan menambahkannya bersama dengan izin.

3] Periksa^{(Check AppX Deployment Service)} status Layanan Penerapan AppX

Di konsol PowerShell, Jalankan Get-Service "AppXSvc"dan lihat.

Status Layanan Penerapan AppX (AppXSVC)^{(AppX Deployment Service (AppXSVC))} harus Berjalan.

Jika itu menunjukkan Stopped , lalu buka command prompt sebagai administrator dan jalankan:

net start AppXSvc

Atau, Anda dapat membuka Regedit dan menavigasi ke:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AppXSvc

Di sini atur nilai " Mulai^(Start) " menjadi " 3 " dan reboot.

Posting^(Post) perubahan ini, Anda dapat menjalankan perintah, dan kesalahan seharusnya tidak terjadi lagi.

Baca^(Read) : Cara mengubah izin File dan Folder di Windows^{(How to change File and Folder permissions in Windows)} .

Bagaimana Saya Mengaktifkan AppxPackage?

Perintah dan file terkait sudah tersedia dengan Windows , dan Anda tidak perlu menginstal sesuatu yang istimewa. Namun, pastikan Anda menjalankannya dengan izin admin yang lain akan mengatakan perintah tidak dikenali.

Bagaimana Mengembalikan Aplikasi Built-In^{(Built-In Apps)} di Windows ?

Buka PowerShell^{(Open PowerShell)} dengan hak administrator, dan jalankan perintah berikut untuk memulihkan semua aplikasi bawaan di Windows.

Get-AppxPackage -AllUsers | For each app: Add-AppxPackage -DisableDevelopmentMode -Register "$($_InstallLocation)\AppXManifest.xml

Butuh beberapa waktu untuk menyelesaikannya, dan semua aplikasi yang tersedia saat Anda mengatur Windows untuk pertama kalinya akan tersedia.

Saya harap posnya mudah diikuti, dan Anda memahami dengan jelas alasan di balik kesalahan tersebut.

PowerShell Get-Appxpackage Not working or Access Denied

Get-Appxpackage is a PowerShell command that can display a list of the app packages that are installed in a user profile. It includes all the applications that are installed from the Microsoft Store or third-party apps. When using the command, if you receive an error— Powershell Get-Appxpackage Access Denied, Not Recognized or Not Working, then this post will help you resolve this.

The error message you could see may vary but typically, it would read:

Get-AppxPackage : The service cannot be started, either because it is disabled or because it has no enabled devices
associated with it. The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

PowerShell Get-Appxpackage Not working

It’s a permission issue that can be resolved by following some checks.

1. Run PowerShell With Admin Permission
2. Check Permission With Destination Directory
3. Check AppX Deployment Service status.

When changing the permission of folders, make sure you do not remove any user account which is already available.

1] Run PowerShell With Admin Permission

Since the command needs to install on the application on a system level, it is important that you execute or run the command when it is launched with admin permission.

• Press the Start button, and type PowerShell
• When it appears on the list, right-click and choose to Run as Administrator
• Execute the command and it should work without error.

Apart from permission denied, you may also receive Not Recognized or Not Working as an error. While Not Recognized is related to admin permission, Not working is related to Services.

Go to Services Snap-in, and locate Client License Service (ClipSVC) and AppX Deployment Service (AppXSVC). Make sure they are available and running.

2] Check Permission With Destination Directory

If you are installing the application in a particular folder, then make sure you have complete permission to write the files inside it.

• Go to the Destination folder, right-click and select Properties
• Then switch to Security tab
• Check if your account is available, and it has full permission.
• You need to also check if the System user account is available and has full control
• If not, you can click on the Edit button, and add them along with the permission.

3] Check AppX Deployment Service status

In the PowerShell console, Run Get-Service "AppXSvc" and see.

The AppX Deployment Service (AppXSVC) Status should be Running.

If it shows Stopped, then open a command prompt as administrator and run:

net start AppXSvc

Alternatively, you could open Regedit and navigate to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AppXSvc

Here set the value of “Start” to “3” and reboot.

Post these changes, you can execute the command, and the error should not occur anymore.

Read: How to change File and Folder permissions in Windows.

How Do I Enable AppxPackage?

The command and related files are already available with Windows, and you do not need to install anything special. However, make sure you execute it with admin permission else it will say the command is not recognized.

How to Restore Built-In Apps on Windows?

Open PowerShell with administrator rights, and execute the following command to restore all the Built-in apps in Windows.

Get-AppxPackage -AllUsers | For each app: Add-AppxPackage -DisableDevelopmentMode -Register "$($_InstallLocation)\AppXManifest.xml

It will take some time to finish, and all the apps that are available when you set up Windows for the first time will be available.

I hope the post was easy to follow, and you clearly understand the reasons behind the error.

Related posts

• Konfigurasikan dikendalikan Folder Access menggunakan Group Policy & PowerShell

• 9 cara untuk membuka PowerShell di Windows (termasuk sebagai administrator)

• Nonaktifkan Security Questions di Windows 10 menggunakan PowerShell Script

• Check Windows 10 OS architecture menggunakan PowerShell or Command Prompt

• Create System Restore Point menggunakan Command Prompt or PowerShell

• Microsoft PowerShell Script Browser membantu Anda menemukan sampel skrip dengan mudah

• Aktifkan Remote Desktop menggunakan Command Prompt or PowerShell

• Cara Nonaktifkan PowerShell di Windows 10

• Cara Menjadwalkan PowerShell script di Task Scheduler pada Windows 10

• daftar fitur PowerShell 7 New

• Cara Menemukan Dan Menonaktifkan Webcams Menggunakan PowerShell di Windows 10

• Export and Backup Device Drivers menggunakan PowerShell di Windows 10

• Cara Mengatur Ulang Microsoft Store apps Menggunakan PowerShell di Windows 10

• Cara Menambahkan PowerShell ke Context Menu di Windows 10

• Perbedaan antara PowerShell and PowerShell Core

• Cara menginstal PowerShell 7.0 pada Windows 10

• Cara Membuat Local User Account Menggunakan PowerShell di Windows 10

• Replace Command Prompt dengan PowerShell di WinX Menu dari Windows 10

• Cara Zip and Unzip files menggunakan PowerShell di Windows 10

• Cara melihat Perintah PowerShell History pada Windows 10