Pemulihan Sistem^{(System Restore)} adalah fitur yang sangat berguna di Windows 10 karena digunakan untuk memulihkan PC Anda ke waktu kerja sebelumnya jika terjadi kecelakaan pada sistem. Tetapi terkadang Pemulihan Sistem^{(System Restore)} gagal dengan pesan kesalahan yang mengatakan " Pemulihan Sistem^{(System Restore)} tidak berhasil diselesaikan", dan Anda tidak dapat memulihkan PC Anda. Tapi jangan khawatir karena pemecah masalah ada di sini untuk memandu Anda tentang cara memperbaiki kesalahan ini dan memulihkan PC Anda menggunakan titik pemulihan sistem. Jadi tanpa membuang waktu, mari kita lihat bagaimana cara memperbaiki System Restore yang tidak berhasil menyelesaikan masalah dengan metode yang tercantum di bawah ini.

Pemulihan Sistem tidak berhasil diselesaikan. File dan pengaturan sistem komputer Anda ^{(System Restore did not complete successfully. Your computer’s system files and settings )}tidak diubah.^{(were not changed.)}

Detail:^(Details:)

Pemulihan Sistem gagal saat memulihkan direktori dari titik pemulihan. ^{(System Restore failed while restoring the directory from the restore point.)}
Sumber: AppxStaging^{(Source: AppxStaging)}

Destination: %ProgramFiles%\WindowsApps
Terjadi kesalahan yang tidak ditentukan selama Pemulihan Sistem. ^{(An unspecified error occurred during System Restore. )}

Panduan di bawah ini akan memperbaiki kesalahan berikut:

Pemulihan Sistem tidak selesai Kesalahan 0x8000ffff berhasil  ^{(System Restore did not complete Error 0x8000ffff successfully )}
Pemulihan Sistem tidak berhasil diselesaikan dengan kesalahan 0x80070005 ^{(System Restore did not complete successfully with error 0x80070005)}
Terjadi kesalahan yang tidak ditentukan selama Pemulihan Sistem 0x80070091 ^{(An unspecified error occurred during System Restored 0x80070091)}
Perbaiki Kesalahan 0x8007025d saat mencoba memulihkan^{(Fix Error 0x8007025d while trying to restore)}

Perbaiki Pemulihan Sistem^{(Fix System Restore)} tidak berhasil diselesaikan.

Metode 1: Lakukan Boot Bersih^{(Method 1: Perform a Clean Boot)}

Terkadang perangkat lunak pihak ke-3 dapat bertentangan dengan Pemulihan Sistem^{(System Restore)} dan oleh karena itu, Anda seharusnya tidak dapat memulihkan sistem Anda ke waktu sebelumnya menggunakan titik pemulihan sistem. Untuk Memperbaiki Pemulihan Sistem yang tidak sepenuhnya gagal^{(Fix System Restore did not completely error successfully)} , Anda perlu melakukan boot bersih^{(perform a clean boot)} di PC Anda dan mendiagnosis masalah langkah demi langkah.

Kemudian coba gunakan pemulihan sistem dan lihat apakah Anda dapat melakukan kesalahan ini.

Metode 2: Jalankan Pemulihan Sistem dari Safe Mode^{(Method 2: Run System Restore from Safe Mode)}

1. Tekan Windows Key + R lalu ketik msconfig dan tekan Enter untuk membuka System Configuration .

2. Beralih ke tab boot^{( boot tab)} dan centang opsi Safe Boot.^{(Safe Boot option.)}

3. Klik Terapkan, diikuti dengan OK.

4. Restart PC Anda dan sistem akan boot ke Safe Mode secara otomatis.^{( Safe Mode automatically.)}

5. Tekan Windows Key + R dan ketik sysdm.cpl  lalu tekan enter.

6. Pilih tab System Protection dan pilih System Restore.

7. Klik Berikutnya^(Next) dan pilih titik Pemulihan Sistem^{(System Restore point)} yang diinginkan .

8. Ikuti petunjuk di layar untuk menyelesaikan pemulihan sistem.

9. Setelah reboot, Anda mungkin dapat Memperbaiki System Restore yang tidak berhasil diselesaikan.^{(Fix System Restore did not complete successfully.)}

Metode 3: Jalankan Pemeriksa Berkas Sistem (SFC) dan Periksa Disk (CHKDSK) dalam Mode Aman^{(Method 3: Run System File Checker (SFC) and Check Disk (CHKDSK) in Safe Mode)}

Perintah  sfc /scannow ( Pemeriksa Berkas Sistem^{(System File Checker)} ) memindai integritas semua file sistem Windows yang dilindungi dan mengganti versi yang salah rusak, diubah/dimodifikasi, atau rusak dengan versi yang benar jika memungkinkan.

1.  Buka Command Prompt dengan hak Administratif^{(Open Command Prompt with Administrative rights)} .

2. Sekarang di jendela cmd ketik perintah berikut dan tekan Enter :

sfc /scannow

3. Tunggu^(Wait) hingga pemeriksa file sistem selesai.

4. Tunggu proses di atas selesai dan ketik perintah berikut di cmd dan tekan Enter :

chkdsk C: /f /r /x

5. Hapus centang opsi Boot Aman^{(Safe Boot)} di Konfigurasi Sistem^{(System Configuration)} dan kemudian restart PC Anda untuk menyimpan perubahan.

Metode 4: Jalankan DISM jika SFC gagal^{(Method 4: Run DISM if SFC fails)}

1. Tekan Windows Key + X dan klik Command Prompt (Admin).

2. Ketik berikut ini dan tekan enter:

DISM /Online /Cleanup-Image /RestoreHealth

3. Biarkan perintah DISM berjalan dan tunggu sampai selesai.

4. Jika perintah di atas tidak berhasil, coba yang di bawah ini:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Catatan: ^(Note:) Ganti^(Replace) C:RepairSourceWindows dengan sumber perbaikan Anda ( Instalasi Windows^{(Windows Installation)} atau Disk Pemulihan^{(Recovery Disc)} ).

5. Reboot PC Anda untuk menyimpan perubahan.

Metode 5: Nonaktifkan Antivirus Sebelum Memulihkan^{(Method 5: Disable Antivirus Before Restoring)}

1.Klik kanan pada ikon Program Antivirus^{( Antivirus Program icon)} dari baki sistem dan pilih Nonaktifkan.^(Disable.)

2.Selanjutnya, pilih jangka waktu di mana Antivirus akan tetap dinonaktifkan.^{( Antivirus will remain disabled.)}

Catatan:^(Note:) Pilih waktu sesingkat mungkin, misalnya 15 menit atau 30 menit.

3. Setelah selesai, coba kembalikan PC Anda menggunakan Pemulihan Sistem^{(System Restore)} dan periksa apakah kesalahan teratasi atau tidak.

Metode 6: Ganti nama folder WindowsApps dalam Safe Mode^{(Method 6: Rename the WindowsApps folder in Safe Mode)}

1. Tekan Windows Key + R lalu ketik msconfig dan tekan Enter untuk membuka System Configuration .

2. Beralih ke tab boot^{( boot tab)} dan centang opsi Safe Boot.^{(Safe Boot option.)}

3. Klik Terapkan, diikuti dengan OK.

4. Restart PC Anda dan sistem akan boot ke Safe Mode secara otomatis.^{( Safe Mode automatically.)}

5. Tekan Windows Key + X lalu pilih Command Prompt (Admin).

3. Ketik perintah berikut di cmd dan tekan Enter setelah masing-masing:

cd C:\Program Files
takeown /f WindowsApps /r /d Y
icacls WindowsApps /grant “%USERDOMAIN%\%USERNAME%”:(F) /t
attrib WindowsApps -h
ganti nama WindowsApps WindowsApps.old^{(rename WindowsApps WindowsApps.old)}

4. Sekali lagi^(Again) pergi ke System Configuration dan hapus centang Safe boot^{(uncheck Safe boot)} to boot normal.

5. Jika Anda kembali menghadapi kesalahan, ketik ini di cmd dan tekan Enter :

icacls WindowsApps /grant administrators:F /T

Ini seharusnya dapat Memperbaiki Pemulihan Sistem yang tidak berhasil diselesaikan^{(Fix System Restore did not complete successfully)} tetapi kemudian coba metode selanjutnya.

Metode 7: Pastikan Layanan Pemulihan Sistem berjalan^{(Method 7: Make sure System Restore Services are running)}

1. Tekan Windows Keys + R lalu ketik services.msc dan tekan enter.

2. Sekarang temukan layanan berikut:

System Restore
Volume Shadow Copy
Task Scheduler
Penyedia Penyalinan Bayangan Perangkat Lunak Microsoft^{(Microsoft Software Shadow Copy Provider)}

3. Klik kanan pada masing-masing dan pilih Properties.

4. Pastikan^(Ensure) masing-masing layanan ini berjalan jika tidak kemudian klik Jalankan^(Run) dan atur jenis Startup mereka ke Otomatis.^(Automatic.)

5. Klik Terapkan, diikuti dengan OK.

6. Reboot PC Anda untuk menyimpan perubahan dan lihat apakah Anda dapat Memperbaiki System Restore tidak menyelesaikan masalah dengan sukses^{(Fix System Restore did not complete successfully issue)} dengan menjalankan System Restore.

Metode 8: Periksa pengaturan Perlindungan Sistem^{(Method 8: Check System Protection settings)}

1. Klik kanan pada This PC atau My Computer^{(This PC or My Computer)} dan pilih Properties.

2. Sekarang klik System Protection di menu sebelah kiri.

3. Pastikan hard disk Anda memiliki nilai kolom proteksi yang disetel ke ON^{(hard disk has protection column value set to ON)} jika Off lalu pilih drive Anda dan klik Configure .

4. Klik Apply^{(Click Apply)} , diikuti oleh OK dan tutup semuanya.

5. Reboot PC Anda untuk menyimpan perubahan.

Direkomendasikan;^{(Recommended;)}

• Perbaiki Kesalahan 0x8007025d saat mencoba memulihkan^{(Fix Error 0x8007025d while trying to restore)}
• Perbaiki Kesalahan 0x8007000e Mencegah Pencadangan^{(Fix Error 0x8007000e Preventing Backups)}
• Nonaktifkan Snap Pop-Up Saat Memindahkan Windows^{(Disable Snap Pop-Up While Moving Windows)}
• Perbaiki Kesalahan Pemulihan Sistem 0x80070091^{(Fix System Restore Error 0x80070091)}

Anda telah berhasil Memperbaiki Pemulihan Sistem tidak menyelesaikan masalah dengan sukses^{(Fix System Restore did not complete problem successfully)} , tetapi jika Anda masih memiliki pertanyaan tentang panduan ini, jangan ragu untuk menanyakannya di bagian komentar.

Fix System Restore did not complete successfully

System Restore is a very useful feature in Windows 10 aѕ it is used to restore your PC to an earlier working time in case of any mishaps to the system. Βut sоmetimes System Restore fails with an error message ѕaying “System Restore did not comрlete ѕuccessfullу”, and you could not restore your PC. But don’t worry as a troubleshooter is here to guide уou on how to fix this error and restore your PС using a system restore point. So without wasting any time let’s see how to actually fix System Restore did not complete successfully isѕue with the below-listed methods.

System Restore did not complete successfully. Your computer’s system files and settings were not changed.

Details:

System Restore failed while restoring the directory from the restore point.
Source: AppxStaging

Destination: %ProgramFiles%\WindowsApps
An unspecified error occurred during System Restore. 

The below guide will fix the following errors:

System Restore did not complete Error 0x8000ffff successfully 
System Restore did not complete successfully with error 0x80070005
An unspecified error occurred during System Restored 0x80070091
Fix Error 0x8007025d while trying to restore

Fix System Restore did not complete successfully.

Method 1: Perform a Clean Boot

Sometimes 3rd party software can conflict with System Restore and therefore, you should not be able to restore your system to an earlier time using a system restore point. To Fix System Restore did not completely error successfully, you need to perform a clean boot in your PC and diagnose the issue step by step.

Then try to use system restore and see if you’re able to this error.

Method 2: Run System Restore from Safe Mode

1. Press Windows Key + R then type msconfig and hit Enter to open System Configuration.

2. Switch to boot tab and checkmark Safe Boot option.

3. Click Apply, followed by OK.

4. Restart your PC and system will boot into Safe Mode automatically.

5. Press Windows Key + R and type sysdm.cpl then hit enter.

6. Select the System Protection tab and choose System Restore.

7. Click Next and choose the desired System Restore point.

8. Follow the on-screen instruction to complete system restore.

9. After reboot, you may be able to Fix System Restore did not complete successfully.

Method 3: Run System File Checker (SFC) and Check Disk (CHKDSK) in Safe Mode

The sfc /scannow command (System File Checker) scans the integrity of all protected Windows system files and replaces incorrectly corrupted, changed/modified, or damaged versions with the correct versions if possible.

1. Open Command Prompt with Administrative rights.

2. Now in the cmd window type the following command and hit Enter:

sfc /scannow

3. Wait for the system file checker to finish.

4.Wait for the above process to finish and the type the following command in cmd and hit Enter:

chkdsk C: /f /r /x

5. Uncheck the Safe Boot option in System Configuration and then restart your PC to save changes.

Method 4: Run DISM if SFC fails

1. Press Windows Key + X and click on Command Prompt(Admin).

2. Type the following and press enter:

DISM /Online /Cleanup-Image /RestoreHealth

3. Let the DISM command run and wait for it to finish.

4. If the above command doesn’t work, then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with your repair source (Windows Installation or Recovery Disc).

5. Reboot your PC to save changes.

Method 5: Disable Antivirus Before Restoring

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible, for example, 15 minutes or 30 minutes.

3. Once is done, again try to restore your PC using System Restore and check if the error resolves or not.

Method 6: Rename the WindowsApps folder in Safe Mode

1. Press Windows Key + R then type msconfig and hit Enter to open System Configuration.

2. Switch to boot tab and checkmark Safe Boot option.

3. Click Apply, followed by OK.

4. Restart your PC and system will boot into Safe Mode automatically.

5. Press Windows Key + X then select Command Prompt (Admin).

3. Type the following command in cmd and hit Enter after each one:

cd C:\Program Files
takeown /f WindowsApps /r /d Y
icacls WindowsApps /grant “%USERDOMAIN%\%USERNAME%”:(F) /t
attrib WindowsApps -h
rename WindowsApps WindowsApps.old

4. Again go to System Configuration and uncheck Safe boot to boot normally.

5. If you again face the error, then type this in cmd and hit Enter:

icacls WindowsApps /grant administrators:F /T

This should be able to Fix System Restore did not complete successfully but then try the next method.

Method 7: Make sure System Restore Services are running

1. Press Windows Keys + R then type services.msc and hit enter.

2. Now find the following services:

System Restore
Volume Shadow Copy
Task Scheduler
Microsoft Software Shadow Copy Provider

3. Right-click on each of them and select Properties.

4. Ensure each of these services is running if not then click on Run and set their Startup type to Automatic.

5. Click Apply, followed by OK.

6. Reboot your PC to save changes and see if you can Fix System Restore did not complete successfully issue by running System Restore.

Method 8: Check System Protection settings

1. Right-click on This PC or My Computer and select Properties.

2. Now click on System Protection in the left-hand menu.

3. Make sure your hard disk has protection column value set to ON if it’s Off then select your drive and click Configure.

4. Click Apply, followed by OK and close everything.

5. Reboot your PC to save changes.

Recommended;

• Fix Error 0x8007025d while trying to restore
• Fix Error 0x8007000e Preventing Backups
• Disable Snap Pop-Up While Moving Windows
• Fix System Restore Error 0x80070091

You have successfully Fix System Restore did not complete problem successfully, but if you still have any questions regarding this guide, please feel free to ask them in the comment’s section.

Related posts

• Fix System Restore Error 0x80070091

• Fix Service Host: LOCAL System (SVCHOST.EXE) High CPU and Disk Usage

• Fix Insufficient System Resources Exist untuk Lengkapi API Error yang

• Fix A Device Attached untuk System yang Tidak Berfungsi

• Fix File System Errors dengan Check Disk Utility (CHKDSK)

• Fix Host Process untuk Windows Services telah berhenti kerja

• Fix Windows tidak dapat berkomunikasi dengan device or resource yang

• Fix NVIDIA Control Panel tidak membuka

• Fix Anda memerlukan izin dari SYSTEM untuk melakukan perubahan ke folder ini

• Cara Membuat System Image Backup di Windows 10

• Fix Error 0X80010108 Pada Windows 10

• Fix System Restore error 0x8007025d pada Windows 10

• Fix System Restore error 0x8007045b pada Windows 10

• Fix System Restore tidak lengkap, Error kode 0x80070005

• Cara Fix Avast tidak membuka pada Windows

• Fix High CPU Usage oleh Service Host: Sistem lokal

• Fix Desktop Refers ke lokasi yang tidak tersedia

• Fix Windows Update Error Code 0x80072efe

• Perbaiki Kesalahan Sistem File Windows 10 2147219196

• Fix Ini salinan Windows tidak Kesalahan asli